Production of keys for Seat cars

Production of keys for Seat cars

We manufacture and program keys for Seat cars:

  • Manufacture of Seat keys
  • Seat key programming
  • Seat key repair
  • Seat key bodies
  • Emergency unlocking of Seat cars
  • Seat Alhambra key production
  • Seat Altea key production
  • Seat Cordor keys production
  • Seat Cordoba key production
  • Manufacture of Seat Ibiza keys
  • Manufacture of Seat Leon keys
  • Seat Toledo key production

Car key production

  • Production of new car keys, programming of keys (“binding” to the car)
  • Deleting previously lost keys from the car memory
  • Production of the ignition key according to the lock
  • Repair of car keys (replacement of buttons, shells, mechanisms)
  • Emergency car unlocking
  • Trade in keys, key cases
  • DPF / FAP software shutdown
  • Programmatic EGR removal
  • Immobiliser software deactivation (immo Off)
  • Engine Control Unit (ECU) repair, cloning, programming
  • SRS (Airbag Control Unit Programming)

 items dispatched within 3 working days.*

SKU: SE-0003 Categories: , Tags: , , , ,

Description

It is not difficult for an experienced professional to recover lost or unusable keys. “The type of Seat key and the year of manufacture of the vehicle are the main factors that determine the time it takes to produce a duplicate. This procedure usually takes between 10 minutes and several hours. “The Seat duplicate key production service is carried out in three stages: the specialist produces the blade, the unlocking device and the programming of the remote control.

Detailed description of each stage of Seat key production

The creation of the required blade pattern completely eliminates the possibility of damaging the workpiece, as the specialist uses CNC machines in his work. In order to be able to quickly engrave a certain type of groove, the parameters required for storage are stored in the machine’s memory. The high precision of the machine and the professional attitude of the craftsman make it possible to obtain a pattern that will look exactly like that of the key produced in the factory.

Once the mechanical part of the work is completed, the master craftsman carries out the electronics work. He programs the key and, if there are buttons on it, the remote control. “The year of manufacture of the Seat car is an important factor in determining the main features of the key’s electronic equipment. The procedure can be carried out using the immobiliser or the diagnostic connectors. It is also possible to create a copy of the key.

Steps in the programming process:

The key is inserted in the ignition lock and the engine is started – but not for more than 5 seconds.

The key is removed and programmed. This procedure shall take no more than 20 seconds.

The unlock button shall be pressed three times while holding down the close button, which shall then be released immediately. The indicator light on the key shall flash five times. This is a signal that the procedure has been carried out correctly and the key will function properly.

The technician shall have no more than 20 seconds to program the second key: the procedure shall be carried out according to the scheme described above. The work carried out and the new Seat key are guaranteed by the technician.

Reviews

There are no reviews yet.

Be the first to review “Production of keys for Seat cars”

Related products